Vendor: Spektrum
Type: Lipo Bag
Price:
12.99
The Spektrum Smart LiPo Bag has exterior dimensions of 14 x 6.5 x 8 cm, making it the perfect size for storing and transporting your valuable LiPo batteries. This essential accessory, with item number SPMXCA400, is a must-have for any drone or RC enthusiast looking to safely and responsibly handle their batteries.
Vendor: Progressive RC
Type: Charge Adapter
Price:
3.49
| Input Connector (Cable) | Male XT60 (male housing, female bullets) |
| Output Connector (Cable) | Female JST |
| Current Rating | 20A |
| Gauge (Wire) | 18 AWG Silicone |
| Length (Wire) | 12" |
Vendor: Progressive RC
Type: Charge Adapter
Price:
7.99
| Input Connector (Cable) |
Male XT60 (male housing, female bullets) |
| Output Connector (Cable) |
Female EC5 (female housing with male bullets) |
| Current Rating | 40A |
| Gauge (Wire) | 9 AWG Silicone |
| Length (Wire) | 12" |
Vendor: Progressive RC
Type: Charge Adapter
Price:
5.99
| Input Connector (Cable) |
Male XT60 (male housing with female bullets) |
| Output Connector (Cable) |
Female EC3 (female housing with male bullets) |
| Current Rating | 40A |
| Gauge (Wire) | 14 AWG Silicone |
| Length (Wire) | 12" |
Vendor: Onisiki
Type: Battery Checker
Price:
9.99
The Onisiki LiPo Battery Monitor Checker is a stylish option to verify the cell voltages of your battery. This checker will also work as a low voltage alarm should your ESC not be equipped with one. Package includes one LiPo checker.
Vendor: SMC
Type: Charge Adapter
Price:
7.95
Vendor: ProTek
Type: Charge Adapter
Price:
4.49
This is a Male XT60 to Female EC3 plug adapter from ProTek R/C. This adapter will allow you to use batteries with an XT60 with a vehicle equipped with EC3 or IC3 plug; including vehicles from Losi, Arrma, Axial and more.
Additionally, this adapter will allow you to charge your XT60 batteries on any of the IC3 equipped Smart Chargers from Spektrum.
Vendor: Reve D
Type: Lipo Bag
Price:
24.99
Introducing the new and improved LiPo Bag 2 - the ultimate solution for increasing safety during battery charging and storage. This versatile bag is perfect for both short and standard size LiPo batteries, thanks to its flame-retardant materials and wide Velcro. In the unlikely event of a fire, the damage will be minimized. Plus, the large-capacity Radio Bag 2 is a convenient choice for carrying and storing your radio, chargers, and other accessories. Don't settle for anything less than the best - choose LiPo Bag 2 for your safety needs!
Vendor: Spektrum
Type: Charger
Price:
24.99
The Spektrum™ 65W Power Block stands out from traditional USB-C converters with its ability to deliver higher power in such a small size. This compact device, powered by Gallium Nitride electronic components, is perfect for converting AC input power to USB-type DC output. Its foldable AC input terminals make it easy to store. It's an ideal companion for the Spektrum S100 1x100W USB-C Smart Charger (SPMXC2090).
Vendor: Spektrum
Type: Charger
Price:
12.99
The S10 G2 USB-C Smart LiPo Charger by Spektrum RC offers an efficient and intelligent charging solution for your LiPo batteries. Engineered with cutting-edge USB-C technology and featuring an IC2 connector, this charger ensures seamless compatibility and rapid charging capabilities.
Vendor: Spektrum
Type: Battery & Charger Combo
Price:
279.99
The Spektrum RC Smart Powerstage 6S G2 Surface Combo w/5000mAh 3S 50C LiPo & S2100 Charger is the ultimate solution for surface vehicles in need of a 3S LiPo Battery. With G2 Smart Technology, this bundle offers a convenient all-in-one package.
The S2100 Smart AC Charger makes battery charging the easiest it has ever been. Its Auto Charge feature recognizes your Smart battery's parameters, such as chemistry type and charge rate, and begins safe, correct charging automatically when the charge lead is connected. A clock on the charger's screen counts until your Smart battery is fully charged and ready to use. Balancing Smart batteries is just as simple. The S2100 charger will balance your Smart LiPo packs through the same, single IC connection used for charging. No separate, confusing balance leads are required when charging a Smart G2 battery.
The S2100 Smart AC Charger's updated, improved user interface features fresh, intuitive menus, icons, and navigation tools. Its clear, easily understandable indicators of Smart battery history and performance provide the information you need to make the best decisions about your batteries when putting gear together for a day at the field or track. USB input and output ports enable you to charge secondary devices and update the charger's firmware, so you always have the latest features. The S2100 Smart AC Charger also includes an ON/OFF switch, cooling fan, detachable power cord, and sleek case with rubber grips that fits perfectly on your workbench and in your pit or field bag.
Drivers enjoy even more Smart advantages when using Spektrum™ Smart G2 50C LiPo batteries to power their vehicles. New "Generation 2" features make these LiPo packs — featuring a 50C continuous discharge rating for high performance and longevity — even simpler and safer to use together with your Smart charger.
For example, Spektrum™ Smart G2 technology makes it much easier to balance charge your LiPo batteries. Balancing information travels through the unique data wire of each Smart G2 battery's innovative IC3® or IC5® connector. As a result, only a single connection is needed — no separate balance lead is required.
Smart G2 batteries come from the factory programmed to discharge automatically to a safe storage voltage of 3.90V after 72 hours of inactivity. The benefits include longer battery life, better performance over the life of the pack, and the peace of mind that comes from knowing your Smart battery is maintenance-free. You can change the battery's Auto Storage settings based on your own preferences. G2 batteries also offer a storage discharge rate that's three times faster than the previous G1 Smart batteries.
As with other Smart batteries, you'll never have to set your own charging preferences for a Spektrum™ Smart G2 battery until you want to. When a Smart G2 LiPo battery is connected to a Spektrum™ Smart charger, its unique charging parameters and health information upload to the charger from the battery's integrated memory microchip. Through the charger you can view and set preferences such as charge rates, so all that's required to charge the pack is connecting it to your Smart charger. Smart technology takes care of the rest.
Vendor: Futaba
Type: Charger
Price:
34.99
Wall Charger for Transmitter or Receiver, LifeP04
RECHARGEABLE BATTERY:
LiFePO4 Polymer Battery/2 Cell
INPUT:
AC100V ~ AC240V - 50/60 Hz - 0.2 A Max
OUTPUT:
7.2 VDC - 800 mA
OPERATING TEMPERATURE:
-10 ~ 40deg C (0 ~ 30deg C Recommended)
Vendor: Progressive RC
Type: Charge Adapter
Price:
4.99
This compact converter is the next best thing to replacing the connector on your battery. Minimal resistance and a tiny footprint ensure that you'll barely notice having the adapter in place. Use the option selection to select the proper adapter for your application
Vendor: Tuning Haus
Type: Lipo Bag
Price:
10.99
Vendor: Bat-Safe
Type: Lipo Bag
Price:
79.99
The Bat-Safe LiPo Charging Case is a simple and effective solution for charging and storing LiPo batteries. If you have an R/C model, chances are you own at least one lithium battery. Lithium batteries are an integral component to surface and air models. In rare instances, lithium batteries can become hazardous and catch fire - destroying your personal items, your home and maybe even the life of you or a loved one.
Thats why Bat-Safe was developed. Bat-Safe is an insulated and vented, steel, double wall steel box that contains the fire and intense heat in the event of a battery fire. The smoke and soot is filtered through a built in flame smothering filtration system to protect the area from odor and a majority of the smoke damage that can occur from a battery fire. Plus, Bat-Safe is light weight, easy to use and most importantly, inexpensive! The Bat-Safe is cheap insurance for anyone who uses lithium batteries of any size.
Other features include the ability to charge and store up to two 6S 5000mAh (222Wh) LiPo batteries safely, a charger stand to help keep your charging station organized and tidy, a handle for easy transportation, a fire proof lid seal, a wire through port that provides an access point for charging wires. All of these features combined make Bat-Safe the most advanced battery charging accessory that creates a safer charging environment than anything else currently available.
In order to utilize the Bat-Safe to it's full advantage, Bat-Safe recommends using balance cable extensions (sold separately) that can connect to the charger on the outside, while charging the battery inside the Bat-Safe box.
Specifications:
Charge Space: 9.5x6.5x4"
Outer Dimensions: 12x9x7"
Weight: 4 pounds
Maximum Battery Capacity: 2x 6S 5000mAh (222Wh)
Vendor: Traxxas
Type: Charge Adapter
Price:
10.00
Introducing the Traxxas TRX-4M ID Battery Charger Port Adapter. This innovative adapter features the TRX-4M iD charging port and a 2-amp charging capacity, making it easy and efficient to recharge your #2821 2-cell LiPo battery with any Traxxas EZ-Peak iD charger. Say goodbye to complicated charging processes and hello to convenience and speed!
Vendor: Progressive RC
Type: Charge Adapter
Price:
3.99 - 4.99
(6 variants)
This is a Progressive RC Short 3" wired battery adapter. Package will include one adapter, 3" in total length. Available in various connectors, use the menu to choose which option you need.
Vendor: Pro Boat
Type: Charger
Price:
9.99
| Input Voltage | 5.0V, 1A |
| Part Type | Electronics |
| Output | DC, 7.4V-500mAh |
Vendor: SMC
Type: Battery Checker
Price:
10.99
We are proud to introduce our Precision Lipo Alarm designed to get a more precise cutoff then an ESC. When running the Traxxas or Arrma ESC which are known to have the cutoff set to low and not adjustable this is a must have item if you are interested in getting maximum cycle life out of your packs.
With standard Lipo alarms the alarm is set at the desired cutoff but the alarm doesn’t account for voltage drop which occurs under heavy acceleration. This means the normal alarms will go off when the pack/cells haven’t reached the desired cutoff voltage. The SMC Precision Alarm has been designed to have a delay before the alarm goes off so this prevents voltage drop from heavy acceleration to trigger the alarm. The Precision Alarm will go off once the desired cutoff is reached. You can see the difference between a normal alarm and the precision alarm by clicking on the video link below.
https://www.edusportsonline.com/jZH8ZE8xYXE
As you can see in the video with the normal alarm set at 3.70V per cell the alarm goes off after a few heavy accelerations. The voltage of the cells is at 3.82V so there is still a good amount of play time left in the packs before the 3.70V cutoff is reached. We then switched to the precision alarm set at 3.70V per cell and we didn’t film the entire session but we got around 7 minutes of play time before the alarm finally went off. As you can see the cells were at 3.72V. This precision alarm is more precise then the ESCs cutoff as the voltage is measured at the cells by connecting the alarm through the balance connector. This by passes the voltage drop encountered in the power connectors and power wires.
We recommend you start with a 3.70V cutoff and see where the cells end up when the alarm goes off as the internal resistance of the cells will impact the amount of voltage drop. So packs with higher internal resistance cells may require the voltage to be lowered to 3.60V per cell.
The Precision Alarm is good for 2S to 8S packs. We sell it as a kit which has a 6S extension cable so you can mount it permanently in your vehicle where there is room. We also include 2 pieces of Velcro so you can mount the alarm either on the pack like the picture below or in the vehicle using the extension cable. We recommend to use the fuzzy side of the Velcro on the back of the alarm.
To set the cutoff on the alarm you must connect it using the proper polarity so the outside black wire on the balance connector must be connected towards the left when the alarm is facing you. You can see this in the picture below. To adjust the cutoff press the button on the end of the alarm until you reach the desired cutoff which we recommend to start at 3.70V. Please note the precision of the cell voltage readings on this alarm can be off by a few hundredths of a volt so it’s not recommended to use this alarm to check the precision of how well your charger charged the cells or if the cells are perfectly in balance once charged.
Below is a picture of the precision alarm installed in an E-Revo with the included extension. We recommend you always put the alarm on the pack that is connected to the negative side of the ESC. We also recommend you label your packs and switch sides every use.
Vendor: Gens Ace
Type: Charge Adapter
Price:
4.99
The Gens Ace 4S XH Male to Male Battery Balancing Cable is an essential accessory for maintaining proper battery balance.
This balance adapter is a replacement intended for Gens Ace 4S batteries with a built-in balance port on the battery. Package includes one balance adapter.
Vendor: Racers Edge
Type: Lipo Bag
Price:
8.99 - 17.99
(3 variants)
Safely and conveniently store, transport, and charge a wide range of LiPo packs with Racer's Edge new safety sack. Constructed from durable and flame resistant ballistic material with heavy-duty stitching and aggressive hook & loop closures.
Large: 330mm x 220mm
Easily holds up to five 6S packs.
Medium 230mm x 180mm
Easily holds up to three 6S packs.
Small 150mm x 110mm:
Easily holds smaller 1S-3S LiPo packs
Briefcase 240mm x 180 x 65mm
Easily holds up to five 6S packs.
Vendor: Gens Ace
Type: Charger
Price:
129.99
The SkyRC BD250 35 Amp LiPo/LiHV/NiMH Battery Discharger & Analyzer displays real-time battery voltage, discharged capacity and discharge current, making it a great option to use when you need to identify your best batteries for competition. This is also a great tool to save time when discharging for storage, as it allows you to discharge your battery faster than when using a standard discharger.
Plus, you can use the PC software to export battery discharge data to your PC, allowing you to see which battery performs best! With PC software connected, the BD250 allows you to export the battery voltage values at 30 second intervals (for the first six minutes). The slower the voltage reduces during discharge, the better the battery performance.
Vendor: Progressive RC
Type: Charge Adapter
Price:
11.99
Easily charge your battery with this flexible cable that converts a single TRX ID connector to an XT60 main lead and JST-XH balance lead. Available in 2S, 3S, or 4S sizes, it's a must-have for standard LiPo chargers.
| Input Connector | Male XT60 (male housing, female bullets) & male JST-XH (male housing, female pins) |
| Output Connector | TRX ID |
| Current Rating | 35A |
| Wire Gauge | 16 AWG |
| Length | 12" |
Vendor: Futaba
Type: Charger
Price:
31.99
This Futaba HBC-3B Battery Charger is intended to charge transmitter battery packs. Compatible with the 4PK, 4PKS, 4PKSR, 6J, 8J, 10J 4YF and 14SG.
Specifications:
Input: 120V AC, 60Hz, 5W
Output: TX, 6 VDC 170mA; RX, 6 VDC 100mA
Vendor: Gens Ace
Type: Charger
Price:
24.99
The Gens Ace Imars Mini Charger is an Intelligent Charger designed specifically for the Gens Ace G-Tech line of smart batteries, which is also compatible with non-smart batteries. When connected to a Gens Ace G-Tech battery, the Imars Mini charger will automatically identify the battery type, voltage through the smart balance connector, and charging current recommended by the battery manufacturer. The charger will automatically start charging in 5 seconds after a G-Tech smart battery is connected.
For non-smart batteries, it's necessary to manually select the battery type and the required working mode to get it started. The charger can intelligently adjust the charging current according to the charging voltage flow of the battery.
NOTE: This charger requires a high output power supply brick. Smartphones, tablets and other type of 'device' bricks are not powerful enough from our testing. If you don't have one, be sure to buy the Gen 65W brick separately, or buy the charger version with the 65W brick included.