Vendor: Pacer Technology
Type: Epoxy
Price:
6.30
The 5 minute cure time means fast building and fast repairs. Vibration resistant and fuel proof, this epoxy is perfect for all types of hobbies and crafts. It does not get brittle with age and it's easy to mix: combine equal parts by volume. QUICK SET Z-POXY is handy to have at home for all types of fix-it jobs, woodworking, and furniture repair.
QUICK SET Z-POXY fully cure in approximately 5 minutes, which allows you will have about 3 minutes of working time. To clean up any uncured or unmixed epoxy, use alcohol, isopropyl or methanol, either will work. Thinning of QUICK SET Z-POXY is not recommended. Mix Z-POXY in a plastic cup or on a non porous surface such as a piece flexible plastic. Mix only enough epoxy as needed. Excess epoxy cannot be saved once mixed. Since epoxies cure by an exothermic chemical reaction (give off heat), and heat can speed the curing of epoxy, mixing large amounts can shorten the pot-life if not quickly spread.
Vendor: Deluxe Materials
Type: Glue
Price:
8.99
The Deluxe Materials Tissue Paste is a great way to bond tissue paper to your balsa airframe. It can be applied using the nozzle lid and spread into corners with a toothpick or finger. Apply the tissue paper and remove any large wrinkles. When fully cured spray the tissue with a 10% Eze Dope mixture (DLMBD42). Once dried this will leave a super strong and flat surface for your balsa models. Package includes one 50ml bottle of tissue paste.
Application Type | Bottle |
Adhesive Type | Tissue Paste |
Vendor: Pacer Technology
Type: Epoxy
Price:
14.99
This is a 4 oz set of Z-Poxy Finishing Resin Epoxy from Pacer Technologies. Clear, equal-mix. Cures in 3 hours. Used for fiber-glassing center section of airplane wings, entire airplanes, boat hulls, and other fiberglass applications.
Works best on:
Vendor: Pacer Technology
Type: CA Glue
Price:
14.99
Vendor: Racers Edge
Type: Glue Accessories
Price:
5.99
Vendor: Pacer Technology
Type: CA Glue
Price:
6.39
High-performance formula for lexan, delron, nylon, plycarbonate, rubber, etc. Ideal for canopies and ARF Kits. Won't fog if Kicker is not used. 1/2-oz.
Works best on:
Adhesive Type | CA |
Application Type | Bottle |
Size | .5 Ounce |
Vendor: Pacer Technology
Type: Epoxy
Price:
15.99
Pacer's 5 Minute Z-Poxy is Resistant to Shock and Solvents, is Non-Brittle, Easy to Sand and has Excellent Gap Filling Characteristics.
EPOXY GLUE 5-MINUTE Contains one 4 oz. Bottle of Resin & one 4 oz.Bottle of Hardener This product retains all of the physical strengthsof epoxy adhesives while offering the added advantage of quick settingeven in thin films at low temperatures. It will bond wood and nearlyall other types of materials, including concrete. It achieves itsterrific strength as a result of a chemical reaction when mixed withthe Hardening agent. Non-shrinking
Clear, equal-mix. Cures in 5 minutes. Vibration resistant formula. Durable, sandable. Excellent for furniture.
Vendor: Pacer Technology
Type: CA Glue
Price:
4.49
Viscosity | Medium |
Adhesive Type | CA |
Application Type | Bottle |
Size | 0.25 Ounce |
Vendor: Beacon
Type: Foam Glue
Price:
8.99
This is a one ounce tube of Beacon Foam Tac Adhesive Foam Glue. FOAM-TAC is perfect for all types of foam including EPP, EPO, DEPRON, ETC. It also works great on balsa wood, carbon fiber, and 3D printed parts. FOAM-TAC’S improved formula now contains UV blockers so that it can be used in the field in direct sunlight without any yellowing or degrading. We’ve also added a special adhesion promoter to make the glue even stronger and more durable than before.
*For RC Builders – Hands down, Foam-Tac is the best choice for building and repairing all parts of foam planes including motor mounts, control horns and rods, attaching servos, and tacking down wires.
Materials It Bonds: FOAM-TAC bonds all types of foam including EPP, EPO, DEPRON, Basla, 3D Printed Pieces and Carbon Fiber
Features: Strong, Flexible, Weatherproof, Waterproof, Does not expand, Does not yellow, UV Resistant
Vendor: Beacon
Type: Foam Glue
Price:
15.99
Beacon FOAM-TAC is perfect for all types of foam including EPP, EPO, DEPRON, ETC. It also works great on balsa wood, carbon fiber, and 3D printed parts. FOAM-TAC’s improved formula contains UV blockers so that it can be used in the field in direct sunlight without any yellowing or degrading. Beacon also added a special adhesion promoter to make the glue even stronger and more durable than before. Package includes one tube of adhesive.
Features:
Materials It Bonds: FOAM-TAC bonds all types of foam including EPP, EPO, DEPRON, Basla, 3D Printed Pieces and Carbon Fiber
Vendor: ProTek
Type: Glue Accessories
Price:
8.99
This is a set of four ProTek R/C Monster Truck Tire Mounting Bands. Too often a faulty glue bond can ruin a tire, as well as possibly damage the wheel and insert. This forces you to repair the tire, or worse...buy a new set of tires. With the aid of these Protek R/C Tire Mounting Bands, creating a tight consistent glue bond is easier than ever!
These mounting bands are ideal for Monster Truck and 1/8 Truggy Tires and will help to make the chore of gluing tires a little easier. The bands apply pressure to the tire and keep the tire bead pressed firmly into the glue channel in the wheel. This eliminates air gaps between the tire and wheel and helps to create a strong glue bond. Plus, seven equally spaced pull tabs located along the outer edge of the band allow you to easily move the bands into the position you need them in. Help avoid tomorrow’s headaches; pick up a set of ProTek R/C Tire Mounting Bands today!
Ideal For:
Vendor: Pro-Line
Type: Glue Accessories
Price:
9.99
Vendor: Pacer Technology
Type: CA Glue
Price:
11.99
This is a 1 oz tube of Zap Rubber Toughened CA from Pacer Technologies. All-purpose adhesive and sealant. Excellent choice for high vibration environments, and bonding rubber such as R/C Tires!
Works best on:
Vendor: Pacer Technology
Type: Glue
Price:
4.99
Z-7 DEBONDER can also be used to remove adhesive left from stickers, pen and marker inks, some paints and stains, decals, correction fluids and finger nail polish. You can use Z-7 DEBONDER to weatherize and highlight your models and soften CA glue prior to sanding.
Z-7 DEBONDER Is best applied directly from the bottle right onto the glue to be removed. Z-7 DEBONDER works by softening the glue so it can be wiped away. Several applications may be necessary to completely remove all of the glue. To remove from your fingers or other body parts, apply Z-7 DEBONDER directly on the glue let it sit for a minute or so, rub the area with your finger, wipe away the softened glue and apply additional Z-7 DEBONDER if needed. If your fingers are glued together apply Z-7 DEBONDER all around the area glued, let it work on the glue for a minute or so, then gently roll your fingers to loosen the glue, apply more and continue working the glued area until yours fingers separate. To remove from a surface, apply directly to the glue and let sit for several minutes, wipe away the softened glue and repeat the application if required. To weather your model apply debonder to a rag first and gently wipe the painted areas you wish to look worn. Although Z-7 DEBONDER will work on most materials and paints, always test on samples for compatibility.
Z-7 DEBONDER works to remove cured CA glues from skin, work surfaces, most plastics, and model finishes.
Adhesive Type | CA |
Application Type | Bottle |
Vendor: Pacer Technology
Type: CA Glue
Price:
4.50
This is a 1/4 fl. oz bottle of Plasti-Zap adhesive from Pacer Technologies. Used for plastic models. Once hardened after about 1 minute, the glue joint can be sanded.
Works best on:
Vendor: JConcepts
Type: Glue Accessories
Price:
13.99
Vendor: Great Planes
Type: CA Glue
Price:
7.99
Vendor: Pacer Technology
Type: CA Glue
Price:
8.99 - 13.99
(2 variants)
Vendor: Pacer Technology
Type: Glue Accessories
Price:
5.49
Pacer Technology's Flexi Tips (24-pack) provide a convenient solution for precise application of Zap adhesives. The flexible tips allow for precise control of glue flow and help reduce waste and cleanup. Flexi Tips help make your DIY projects easier and more accurate.
Vendor: Pacer Technology
Type: CA Glue
Price:
7.99
This is a 2 fl. oz bottle with pump of Zip Kicker accelerator from Pacer Technologies. Best working accelerator for ZAP and all other super glues you'll find! Sets in just a few seconds. 2-oz pump bottle.
Adhesive Type | Accelerator |
Size | 2 Ounce |
Application Type | Pump Sprayer |
Vendor: Pacer Technology
Type: Glue
Price:
4.39
Overview
The world's best canopy glue. Works on all materials, and dries clear
Specs
Adhesive Type Canopy Glues
Application Type Bottle
Size 2 Ounce
Vendor: Pacer Technology
Type: CA Glue
Price:
8.99
Overview
Gets into tight places. The aerosol version is compatible with all ZAP products, as well as other CA brands, an dis safe on plastics 5 oz. can.
Specs
Adhesive Type Accelerator
Application Type Aerosol Can
Size 5 Ounce
Viscosity Medium
Vendor: Pacer Technology
Type: Epoxy
Price:
24.99
Overview
Odorless, equal-mix, Cures in 6 to 8 hours. Easy sanding. Great for glass cloth, sheeting wings. Compatible with many polyester resins.
Specs
Adhesive Type Finishing Resin
Application Type Bottle
Size 12 Ounce
Vendor: Pacer Technology
Type: Epoxy
Price:
15.99
Overview
15 min. work time, cures in 30. Great for fiberglass fuselages, boat hulls, skinning foam parts. Equal-mix, accepts balloon filler for forming fillets. 8-oz kit.
Specs
Adhesive Type Epoxy
Application Type Bottle
Size 8 Ounce
Vendor: Pacer Technology
Type: Epoxy
Price:
14.99
The 5 minute cure time means fast building and fast repairs. Vibration resistant and fuel proof, this epoxy is perfect for all types of hobbies and crafts. It does not get brittle with age and it's easy to mix: combine equal parts by volume. QUICK SET Z-POXY is handy to have at home for all types of fix-it jobs, woodworking, and furniture repair.
QUICK SET Z-POXY fully cure in approximately 5 minutes, which allows you will have about 3 minutes of working time. To clean up any uncured or unmixed epoxy, use alcohol, isopropyl or methanol, either will work. Thinning of QUICK SET Z-POXY is not recommended. Mix Z-POXY in a plastic cup or on a non porous surface such as a piece flexible plastic. Mix only enough epoxy as needed. Excess epoxy cannot be saved once mixed. Since epoxies cure by an exothermic chemical reaction (give off heat), and heat can speed the curing of epoxy, mixing large amounts can shorten the pot-life if not quickly spread.
QUICK SET Z-POXY is a premium two part epoxy adhesive.
Adhesive Type | Epoxy |
Size | 4 Ounce |
Application Type | Bottle |