edusportsonline

ProTek RC Gold P3 Samurai Turbo Glow Plug (Ultra Hot)

2024-08-08T10:46:38-04:00

Vendor: ProTek
Type: Glow Plug
Price: 11.99

This is the ProTek R/C Gold O.S. P3 "Ultra Hot" Turbo Glow Plug, the exclusive plug of the Samurai 321B Nitro Engine. The ProTek R/C P3 plug is designed for use in most .18 - .28 off-road turbo head engines such as O.S., RB, Novarossi, Werks and Orion. This P3 variety provides ultra hot operation for optimal idling and acceleration. Package includes one plug.

Features:

Easier to tune
More low-to-middle range power
Quicker throttle response
Faster acceleration
Better mileage
Crisper idling
Increased longevity

Morgan Fuel Cool Power 10% (4) HAZ *Archived

2024-08-03T13:02:20-04:00

Vendor: Morgan Fuel
Type:
Price: 28.75

For over 35 years Cool Power's quality and performance have been proven again and again. In countless competitions and endless hours of weekend flying, it exceeds the demands of the most demanding pilots. This is why it continues to be the #1 Selling Fuel worldwide. Continued improvement in synthetic formulation is what gives Cool Power its advantage. It combines high-temperature performance and protection for the unique conditions of model engines. Cool Power is the confirmed Global Benchmark for Synthetic Model Fuels.

Assault RC AC Nitro Engine Heater Black (120V) (.19-.28 Engines)

2024-08-01T15:20:43-04:00

Vendor: Assault RC
Type: Nitro
Price: 69.99

This is the Assault RC 120V Engine Head Heater. The Assault RC 120 Volt Engine Heater allows you to pre-heat your engine without the use of a heat gun before starting your engine on the starter box. This Heater is designed to uniformly heat all the critical internals of your engine, to help relieve the stress on the crank, connecting rod, piston and sleeve during warm-up. It will properly pre-heat your engine to 180-200°F in as little as 10 to 15 minutes (depending on ambient temperature).

This Engine Heater was designed with racing in mind, but is a powerful tool that can also be used by any nitro RC enthusiast. Pre-heating your race engine has become an important part of any competitive racing program to ensure your engine is ready to rip when the tires hit the track. This product makes the pre-heating process effortless, allowing you to focus on the important details like chassis setup and engine tune. No more warm up laps to build engine temps, no more waving a heat gun around trying to evenly distribute heat to your engine before you break it in or start it up on a cold day. Most importantly, this engine heater will quickly pay for itself by increasing engine life and performance! Get the maximum life and performance out of your high performance RC racing engine with the Assault RC Engine Heater.

Features:

Properly and effectively heats all critical engine parts
Can be operated from any AC power source
Power cord includes a wall plug for any AC outlet
Fireproof and heat resistant adjustable cover with an embroidered logo
Fits all .21-.25 nitro engines
Very small, lightweight and compact for quick, easy storage
Uses the same heating element that is found in both the Aerospace and Racing industry
Glow plug igniter and temperature access port allows you to start and monitor your engines temperatures without having to take the heater off
Distributes heat so effectively it will also heat the chassis and differentials
Designed with safety as a top priority, and it uses no metal parts
Heating element is moisture and chemical resistant
Makes starting and tuning easier
Eliminates unnecessary wear and stress on critical engine components
Saves fuel. No more starting your engine to warm it up
Will pay for itself in short time by increasing engine life and performance

Ultimate Racing Pre-Oiled Foam Air Filter (MUGEN MBX8R) (12PCS)

2024-07-07T15:56:44-04:00

Vendor: Ultimate Racing
Type: Nitro
Price: 28.69

This is the Ultimate Racing pre-oiled foam air filter, and it's been specially designed for use with Mugen MBX8R air filter. The combination of this pre-oiled foam air filter with the Ultimate Racing air filter oil guarantees the maximum air flow and offers an excellent air filtration and protection for your engine. Available in economic packs of 6 or 12 pieces pre-oiled and safely stored in a double zipper bag, so can be stored for long time and ready to use when you need them.

Ultimate Racing Pre-Oiled Foam Air Filter (MUGEN MBX8R) (6 PCS)

2024-07-07T15:54:38-04:00

Vendor: Ultimate Racing
Type: Nitro
Price: 14.00

Robart Super Fueler 2

2024-06-24T15:50:38-04:00

	Vendor: Robart Type: Aircraft Parts Price: 9.97
This Fueler is ideal for tightly cowled engines where access is difficult. It automatically connects your fuel source to the fuel tank for refueling, then it reconnects the tank to the engine crankcase, all without disturbing the fuel lines. Safe for use with glow, gas and smoke fluids.

ProTek RC 2090 Tuned Exhaust Pipe w/75mm Manifold (Welded Nipple)

2024-06-11T09:51:09-04:00

Vendor: ProTek
Type: Nitro
Price: 169.99

This is the ProTek R/C 2090, EFRA 2089 Tuned Pipe, with an included 2090 75mm Manifold. This package also includes two long manifold springs, three short pipe springs and two manifold gasket.

The ProTek R/C 2090 is a finely-crafted competitive .21 off-road tuned pipe that features a mirror like chrome finish and high strength welded nipple. Designed with a narrower, longer body, the 2090 is ideal for increased bottom end performance and small track optimization. Although the 2090 is not as smooth as the ProTek R/C 2060 pipe, it will provide great torque for those hard to clear jumps, and heavy truggies.

2090 Tuned Pipe Features:

Included 75mm manifold
Mirror chrome like finish
Durable high-strength welded nipple
Narrow, long body design
Maximum low-end performance

Includes:

(1) 2090 Tuned Pipe
(1) 2090 75mm Manifold
(3) Manifold Exhaust Springs
(2) Tuned Pipe Exhaust Springs
(2) High Temp Manifold Gaskets
(1) Set Screw

ProTek R/C is an AMain Sports & Hobbies Brand.

Full-Force RC v2 High Flow Fuel Line Kit for HPI Baja 5B/5T/5SC & Losi 5ive

2024-05-22T15:21:42-04:00

Vendor: Daves Discount Motors
Type: Parts
Price: 23.99

Fullforce RC 2nd Generation High Flow Fuel Line Kit

Updated fully machined brass fittings and high quality Tygon fuel line allow for unrestricted fuel flow with this setup. Bring your engine back to life and get rid of those stock restrictive fuel lines! This kit not only allows better fuel flow and more power out of your engine but it also routes you fuel lines in a much cleaner and more professional manner.
Taking into consideration comments from our customers on our original kit we've addressed all the issues here. No more worries about the fit in the stock grommet, or having the sharp machined barbs cut your fingers during the install. These new fittings are perfectly sized to the supplied fuel line. The barbs are integrated into the fittings and they hold super tight in the rubber grommet.
Kit includes two assembled brass fittings, fuel line clips and two feet of Tygon fuel line. Can be used in the Baja 5B and 5T/5SC as well as a variety of other 5th scale vehicles, including Losi 5ive, etc. Does not fit Losi DBXL.

DDM Quick Fuel Connectors

2024-05-22T15:13:57-04:00

Vendor: Daves Discount Motors
Type: Parts
Price: 6.99

FUEL QUICK CONNECTORS

These simple and inexpensive quick disconnects will allow quick and painless removal of engines or fuel tanks. Not only can you now quickly disconnect the fuel lines from your motor, but no more broken carb fuel fittings trying to pull the tubing off.

Also, if you have one of the small mechanical fuel pumps on your gas can, you never need to take the fuel cap off your car again, just get another set for your gas can/pump, and plug it right into the tank, no more debris falling in your fuel tank.

If you remove your motor, and are not going to be putting another motor in right away, or are swapping out between multiple motors, just run a male and a female off of the tank (and of course on the motor) and plug them into each other so no fuel leaks. The only maintenance required is to wipe off the male side of the connector when dirty, and that's it.

NOTE: Certain fuel tubing can be difficult to push over the barb depending on internal diameter of the fuel line. DDM suggests lightly sanding the barb down on the fuel connector and using some window cleaner to allow the fuel tubing to slide over more easily.

INCLUDES:

2 male connectors
2 female connectors

WIRC RTX/SBX Complete 125cc Fuel Tank

2024-05-16T14:22:33-04:00

Vendor: WIRC
Type: Parts
Price: 32.99

100325

FUEL TANK (125cc)

O.S. #10 A5 Glow Plug Cold Air (1)

2024-04-03T16:48:45-04:00

	Vendor: O.S. Engine Type: Glow Plug Price: 13.99
This is a pack of one OS Engine #10 A5 Cold Air glow plug. 71605100

Traxxas TRX 2.5R .15 IPS Shaft SlideNitro Engine w/ Pull Start

2024-03-22T12:21:28-04:00

Vendor: Traxxas
Type: Nitro Engine
Price: 169.99

This is the TRX 2.5R .15 Rear Exhaust IPS Shaft, Standard Plug, Slide Carb Engine, Pull Start engine from Traxxas. The Power of TRX 2.5 - Elevating Ready-To-Run to Ready-To-Race®!

The TRX 2.5 Racing Engine is loaded with advanced engine design features such as the free-flowing rear exhaust, the unique composite slide carburetor, and innovative porting that previously would only be found on the most exotic, modified racing engines. Traxxas brings it all to you and makes it start with the push of a button.

The TRX 2.5 Racing Engine is completely designed and manufactured by Traxxas. Our engineering team spent over 2 years designing not only the engine, but also brand new, state-of-the-art manufacturing facilities to allow us to produce the engine to the absolute highest quality standards. Multiple manufacturing lines allow us to produce a large volume of engines and bring you much higher levels of quality and technology at down-to-earth prices. Since the TRX 2.5 is actually made by Traxxas rather than being purchased off-the-shelf from an outside supplier and re-branded, the TRX 2.5 is backed by Traxxas know how, and Traxxas' unmatched customer support.

With 60% more power than the Pro .15 engine, the TRX 2.5 Racing Engine installed in a stock, out-of-the-box Nitro 4-Tec took it from 50mph top speed to speeds in excess of 60mph, with nothing more than an engine change. Nitro Rustler also gained 10mph to reach 47mph out of the box. By adding a 22-tooth clutch bell 50+mph speeds were attained. The new T-Maxx? 40+mph and wheelies on demand! These examples are a strong testament to the power of the TRX 2.5 Racing Engine.

The great thing about TRX 2.5 power is that it feels like it is "on-pipe" across almost the entire RPM scale. There's lots of power down low for tire-spinning, wheelie popping torque, and there's big power up high for screaming, top-speed performance. The TRX 2.5 Racing Engine was built to provide big horsepower all the time, with little focus on an exaggerated peak horsepower number that occurs at an impractically high RPM. It's made for real world drivers like you (and us!) that just want to rip-it-up on the track, in a field, or anyplace you can find.

The many things that were put into the engine to maximize power output and efficiency also have the benefit of making the TRX 2.5 Racing Engine easier to tune. It's tolerant to to a very wide range of needle settings and variations in temperature, altitude, etc. The engine is tightly sealed with o-rings throughout to eliminate air leaks that can cause inconsistent running performance. The engine responds precisely to changes in the needle settings for easy, predictable tuning.

ProTek RC Samurai RM.1, RM, S03 & R03 Connecting Rod

2023-12-20T10:24:18-05:00

	Vendor: ProTek Type: Nitro Price: 45.99
ProTek R/C Samurai RM.1, RM, S03 & R03 Connecting Rod. Package includes one replacement connecting rod.

HPI Fuel Line Set 1/5 Scale (also fits Losi 5ive)

2023-11-24T12:06:40-05:00

Vendor: Daves Discount Motors
Type: Parts
Price: 27.99

HPI Racing replacement fuel line set is a gas type fuel line with a built in filter. This product includes one gas line with built in filter. One clear gas fuel line and one rubber grommet.

Requires:

Installation

ProTek RC "Fast Fill 2" Fuel Bottle Plugs w/O-Rings (2)

2023-11-22T22:30:46-05:00

	Vendor: ProTek Type: Tools & Accessories Price: 4.99
Protek RC "Fast Fill 2" Fuel Bottle Plugs with O-Rings. These are replacement fuel bottle plugs for the Protek "Fast Fill 2" fuel bottle (PTK-7606). Package includes two fuel bottle plugs with O-rings.

Sullivan Gas Tank Re-Plumb Kit

2023-11-21T10:16:47-05:00

	Vendor: Sullivan Type: Nitro Price: 5.99
The Sullivan Gas Tank Re-Plumb Kit is designed for roof tank installations. The kit contains all the parts needed to quickly and easily reconnect gas tanks, offering a safe and reliable alternative to manual roof tank installations. Features include the highest-grade brass fittings and all necessary accessories.

O.S. No.7 Short Body Standard Glow Plug "Medium Hot"

2023-10-10T21:26:53-04:00

Vendor: O.S. Engine
Type: Glow Plug
Price: 11.99

This is an O.S. #7 Glow Plug. Recently developed to focus on easier running at low and medium speeds, this plug is a slightly hotter heat range than the O.S. #8 plug. This plug is ideal for helicopter engines with superior performance around hovering RPM range, which is critical for smooth and powerful 3D and F3C type flight. Also great all around plug for most 2-stroke standard plug airplane, helicopter and car engines.

Model	Heat Range	Description
No.6	Hot	Formerly known as the OS A3 plug. This hot plug will provide a more stable idle and crisp acceleration when compared to a cold plug. This plug is recommended for low nitro content fuels and .12 class engines.
No.7	Medium Hot	Slightly "hotter" than the #8 and ideal for the constant "on/off" throttle action in 1/10 and 1/8 scale racing.
No.8	Medium	A medium heat range plug for 1/8 scale racing and most .12-21 car, boat and truck engines.
No.10	Cold	Formerly known as the OS A5 plug. This is now rated as a cold plug and is recommended for high nitro content fuel. This cold plug will produce the most power, but will provide a less stable idle and a narrow tuning window

Traxxas Air Filter Body/Filter Support/Cap

2023-08-10T11:52:08-04:00

Vendor: Traxxas
Type: Nitro
Price: 14.00

This is the high volume air filter body for the Traxxas Revo 3.3.

Features:

Replaces damaged or dirty air filter assemblies
Plastic body with foam element and rubber attachment hose

Includes: Foam filter and pre filter, support cap, filter base and wire mount

Requires: Air filter oil

Specs:
Total Height: 3.9 (100mm)
Filter Diameter: 1.6 (41mm)

Morgan Fuel Cool Power 15% Nitro Airplane Fuel

2023-07-04T15:05:29-04:00

Vendor: Morgan Fuel
Type:
Price: 32.99

Key Features

Quart size of all-Popular Cool Power 15%
17% All-Synthetic Oil
Premium Performance
Prolonged engine life

Overview

Formulating a Competitive Advantage

Cool Power® model fuels are designed to meet the extreme demands of modern model engines and provide exceptional protection and performance. Groundbreaking achievements have enabled Cool Power® to win rave reviews both in competition and at the local flying field. Morgan Formulas are optimized for model engines to insure:

Premium Performance
Prolonged engine life
Superb tuning characteristics
It runs like the name says, "Cool"
Clean running

Morgan Fuel understands the specific needs of your engine and meets those needs with high-performance lubrication, a scientifically designed additive package, the purest nitro and methanol. Morgan championship winning test pilots and our nearly 30 years of world-class fuel blending experience mean you get the best fuel for whatever your flying.

Specs

Nitro Percentage	15 Percent

Mugen Seiki Fuel Bottle (500cc) *Archived

2023-07-03T16:21:42-04:00

Vendor: Mugen Seiki
Type:
Price: 15.25

This is a Mugen Seki 500cc fuel bottle.

Mugen Seiki Fuel Tank w/Clunk

2023-07-03T16:21:11-04:00

Vendor: Mugen Seiki
Type:
Price: 28.49

This is a replacement Mugen Fuel Tank. The internal fuel baffles on this tank have been installed to increase fuel pick up and keep the fuel clunk position correctly.

Compatibility:

Mugen MBX7R
Mugen MBX8

ProTek RC "SureStart" Rechargeable Glow Igniter w/Charger (2100mAh NiMH) *Archived

2023-07-03T16:20:23-04:00

Vendor: ProTek
Type:
Price: 15.75

This is the ProTek R/C "SureStart" Rechargeable Glow Ignitor with Charger. The SureStart ignitor is a high quality rechargeable glow ignitor with an included 2100mAh NiMH cell, and wall charger. This ignitor has a 2.25" reach, and the included wall charger will charge the included battery in approximately 6 hours. For the best performance during a race day it is recommended that the ignitor be left on the charger when not in use.

ProTek RC Nitro Starter Set w/Glow Ignitor, Fuel Bottle, Wrenches & Screwdrivers *Archived

2023-07-03T16:20:23-04:00

Vendor: ProTek
Type:
Price: 29.99

This is the ProTek R/C Nitro Starter Set. This package includes many of the critical accessories that are required to get your nitro vehicle running, including a ProTek Fast Fill 500cc fuel bottle, a SureStart rechargeable glow ignitor, a large 5-way wrench, a small 4 way wrench, as well as a small flat head screwdriver and a small Phillips head screwdriver.

The Fast Fill fuel bottle's 500cc graduated reservoir holds enough fuel to last a long main event, while the super soft material makes it easy to fill your tank quickly. At 4.5" the blue-anodized spout is long enough to reach through any opening and find the tank. A rubber cap is included to prevent spills and keep dirt out of the bottle, and the cap is tethered to the spout so you won't lose it.

The SureStart ignitor is a high quality rechargeable glow ignitor with an included 1800mAh NiMH cell, and wall charger. This ignitor has a 2.25" reach, and the included wall charger will charge the battery in approximately 6 hours. For the best performance during a race day it is recommended that the ignitor be left on the charger when not in use.

The tools included in this kit are where the real value comes into play! The large 5-way wrench features 8, 9, 10 and 12mm nut drivers, as well as a 17mm wrench in the center, while the small 4-way wrench has 4, 5, 5.5 and 7mm nut drivers. That's the equivalent of 9 wrenches, in two tools! There is also a Φ3 flat head screwdriver with a 3" reach that is perfect for tuning engines, and a Φ3 Phillips screwdriver that can be used to maintain servos or anything else that requires a small Phillips head screwdriver.

Includes:

(1) 500cc Fast Fill fuel bottle
(1) Rechargeable SureStart glow ignitor w/wall charger
(1) Large 5-Way wrench w/8, 9, 10 and 12mm nut drivers & 17mm wheel wrench
(1) Small 4-Way wrench w/4, 5, 5.5 and 7mm nut drivers
(1) Small Phillips head screwdriver
(1) Small flat head tuning screwdriver

Racers Edge 500cc Deluxe Fuel Bottle RCE1520 *Archived

2023-07-03T16:19:28-04:00

Vendor: Racers Edge
Type:
Price: 7.99

500cc Deluxe Fuel Bottle

Racer's Edge deluxe fuel bottle features a 500cc capacity and an anodized aluminum spout with safety cap for maximum durability in all racing conditions. Manufactured for maximum flexibility for quick and efficient fueling during pit stops.

Dynamite Fast Fill Fuel Bottle, 500ccm *Archived

2023-07-03T16:18:49-04:00

Vendor: Dynamite
Type:
Price: 8.14

Leaky fuel bottles and costly spillage can dampen R/C fun. Dynamite's Fast Fill Fuel Bottle features a tight, leak-free lid and spout that allows for easier and cleaner refills. It also takes the guesswork out of how much fuel has been used. Molded-in measurement lines show how much fuel is in the bottle in increments as small as 10cc! Dynamite Fast Fill Fuel bottles are available in two convenient sizes: 250cc for smaller tanks and 500cc for those long hauls. Dynamite's Fast Fill Fuel Bottles are available anywhere Dynamite accessories are sold.