Vendor: JConcepts
Type: Racing Body
Price:
42.99
JConcepts F2 1/10 Short Course Truck Low-Profile Body. Elevate your Short Course Truck performance to the next level with this optional F2 1/10 Short Course Truck body! The concept is simple, lower the roof line, improve the functionality of air-release louvers, and incorporate the latest number and name plate performance geometry, while providing an edginess to the design! JConcepts incorporated the low-profile and V-style cab into the design and sunk additional louvers into the roof. To increase rigidity, the team added a slight stabilization fin in the center and a railed edge on each side of the cab, as the cab falls away and into the bed area with a hard chamfer leads into a series of stepped sections allowing more air escape areas. In addition, four more deep rooted louvers are placed between the body mounting area that can be tuned to fit racers' driving preferences!
The F2 body design starts at the front end with high-impact looks of a large format canvas in the grille and headlight area. The included decal sheet can be used to stealth out the entire front end with blank decals or go for two of the different and highly detailed looks of the light and signal appearance found on passenger vehicles. In the hood area, there is a large cut-in feature with trim lines, allowing you to add additional air escape holes and maximize airflow. The fenders are hard-edged and blend straight into the F2 aggressive design while providing plenty of clearance for racing or bashing tires! All while effectively lowering the CG (Center of Gravity) to provide supreme stability, increased speeds and better cornering handling to give racers the ability to push the limit even harder than before!
NOTE: Painted body shown in the photos is for illustrative purposes only. The product you will receive is clear and unpainted.
Vendor: Traxxas
Type:
Price:
30.00
Vendor: Mugen Seiki
Type:
Price:
34.49
This is a replacement Mugen MBX8 ECO 1/8 Electric Buggy Body in Clear Lexan. This body is trimmed but requires polycarbonate paint. Window masks are also included.
Vendor: WIRC
Type: Racing Body
Price:
42.99
Vendor: WIRC
Type: Body
Price:
37.99
Vendor: JConcepts
Type: Racing Body
Price:
10.99
Vendor: Traxxas
Type: Body
Price:
69.99
This is a replacement Traxxas 2017 Ford Raptor Pre-Painted Short Course Body in Black color. This body is fully painted, pre-trimmed and has pre-applied decals.
This body is intended for the Slash
Vendor: WIRC
Type: Wing
Price:
15.99
The WIRC High Downforce Rear Wing generates up to 50% more downforce in comparison to other wings of the same shape and size, making it ideal for racing applications. This wing is designed to optimize the flow of air and reduce turbulence, resulting in increased stability and performance.
Vendor: Mugen Seiki
Type: Racing Body
Price:
45.99
Vendor: JConcepts
Type: Racing Body
Price:
12.00
JConcepts B6.1 Aero Rear Diffuser. A rear diffuser is a huge part of 1:1 race car aerodynamic grip which has shown to improve performance. In off-road racing, ride-height, ground clearance and suspension travel substantially affect handling and are routinely adjusted to benefit one section of the track or another. It’s difficult to install low-mounted aerodynamic features because of the general abuse off-road vehicles endure, however, JConcepts has taken on the task to mount another aero option.
For the all-important balance between flat track tuning and elevation off-road features, JConcepts has moved the Diffuser into a higher position. The position, although not traditional, still provides affects of aerodynamics without limiting rear clearance. A rather tidy mix of diffuser and mid rear wing provides drivers another tuning option not available until now.
The item includes two pieces and can be fitted easily to popular vehicles like the B6.1 | T6.1 and SC6.1. Trim the part according to the cut-lines and using the same 3mm hardware on the rear ball-stud mount, install the diffuser on top and secure with the same screws. Be prepared, have the options and get dialed in with JConcepts.
Features:
Vendor: JConcepts
Type: Wing
Price:
12.99
Vendor: JConcepts
Type: Racing Body
Price:
29.99
The JConcepts B6.4/B6.4D "P2" Buggy Body with Carpet Wing for the Team Associated B6 vehicle is the meanest, nastiest thing out for 1/10th buggy racing. The Punisher 2 separates itself from the rest with its distinctive styling. The P2 is all about performance with riveting details including raised nose/hood, taller cab and rear-end force features. The side-pods are once again JC chamfered to provide that legendary look and the secondary window screams JConcepts styling. The cab drops off quickly and runs deep toward the rear giving plenty of drift to the newly added winglets. The tall, rear fin stabilizer acts as a vane to keep the buggy tracking in the proper direction while also maintaining a rigid roof-line even with light-weight materials. The P2 body is also available in a light weight version (JCO0476L) giving you the most weight saving possible.
The Punisher 2 body is made famous by Spencer Rivkin taking the 2wd modified TQ and 1st place during the 2019 IFMAR World Championships in Trencín, Slovakia. Dakotah Phend uses the P2 body at dirt racing events winning the 2021 and 2022 ROAR National Championship with the unique body shell style. The P2, available in standard weight, and light-weight materials give users unmatched tunablity while delivering on class leading looks and swagger.
NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
Features:
Includes:
Vendor: TLR
Type: Racing Body
Price:
45.99
Vendor: Kyosho
Type: Wing
Price:
1.00
This is a Kyosho MP9 1/8 Buggy Wing. This wing was wind tunnel tested to work in combination with the MP9 body, and when used together will provide improved aerodynamic performance. Plus, its available in a variety of colors so you can get the perfect color to suit your paint scheme.
Vendor: tlr
Type: Wing
Price:
17.99
This is a Team Losi Racing IFMAR Wing in White for the 1/8 Scale 8IGHT-X 4WD Nitro Buggy.
Vendor: TLR
Type: Wing
Price:
15.99
This is a pack of two Team Losi Racing 6.5" Precut Medium Downforce Wings. The 6.5” wide TLR Medium Downforce Rear Wing provides fantastic grip and stability in all conditions. It’s made from 1.2mm thick lexan for longer life and has raised end plates for extra tire clearance. Three scribe lines across the rear offer repeatable wickerbill trimming options.
Vendor: Arrma
Type: Body
Price:
57.99
Awesome looks and tough ARRMA durability, with no need for complicated cutting or fitting to go out and hit the dirt.
High-quality molded body - Head-turning paint scheme - Pre-decaled with detailed ARRMA vinyl stickers that add stylish looks - Pre-trimmed and drilled for fast and easy installation
1 x SENTON 4X4 MEGA Painted Decaled Trimmed Body (Red)
Vehicle Type | Short Course Truck |
Material | Polycarbonate |
Color | Red |
Scale | 1/10 |
Vendor: JConcepts
Type: Wing
Price:
15.99 - 16.99
(4 variants)
This is the JConcepts Razor 1/8 Off Road Wing. Designed to take on this rigors of 1/8th sale racing this fresh offering from JConcepts gives modern performance in an aggressive looking package. The Razor has been modeled after their 1/10th polycarbonate off road wings, using a single vertical direction side-dam incorporated into the base wing providing a little freedom during highspeed turning and 180-degree corners. The leading edge of the dams are angled to slide through the air with ease, while the base of the wing has multiple heights allowing the wing to sit lower on the vehicle due to a lowered center section. On each side of the lowered section, tall center dividers channel the air and help maintain stability.
A very tall rear dam transitions twice to improve forward grip, helping your vehicle feel very comfortable in choppy and loose conditions. Underneath, the wing has a performance core with center fin and light-weight pocketing to reduce the overall weight. The Razor wing has pre-marked locations to allow the opening of the rear dam to allow more wind flow and air to escape during jumping. This allows racers to easily add holes to the back of the wing with hand trimming, giving you another tuning option. Lastly a grid is positioned on the bottom and molded into the design to allow the racer to mount the wing squarely and accurately to just about any 1/8th off-road vehicle. Developed to provide extreme performance while adding aggressive looks to your 1/8th vehicle, JConcepts has delivered yet again!
Vendor: Kyosho
Type: Wing
Price:
1.00
This is the replacement Kyosho Plastic Wing included with the TKI4 Buggy Kit. This plastic wing is offered in multiple colors and features mounting holes for quick installation, as well as two wickerbills for high or low downforce. Mounting hardware is also included.
Vendor: Team Associated
Type: Racing Body
Price:
30.99
Team Associated RC8B4e Gamma 1/8 Buggy Body. This replacement body is intended for the Team Associated RC8B4e. Made from durable polycarbonate, this body comes clear allowing you to apply a one of a kind paint scheme. Package includes one clear body and one window mask sheet.
NOTE: Painted body shown in photos is for illustrative purposes only. The product you will receive is clear and unpainted.
Vendor: JConcepts
Type: Racing Body
Price:
30.99
The JConcepts S15 RC8B4e 1/8 Buggy Body brings a high-performance body shell designed to give a competitive edge. JConcepts' design team took careful note of Team Associated's fresh RC8B4e chassis design to give you a body ready for peak performance.
The S15 blends performance features from the popular Silencer body with updated features such as mid-body winglets and rear stabilizer kick-up. The roof of the body remains strong with the upper fin in position for stability and tracking ability. Since the chassis platform has a variety of battery position possibilities, the rear side-pods have been raised for more clearance to accommodate a tall shorty battery as well as the kit recommended saddle pack layout.
NOTE: Painted body shown in the photos is for illustrative purposes only. The product you will receive is clear and unpainted.
Features:
Includes:
Vendor: JConcepts
Type: Racing Body
Price:
28.99
Each P1 body receives window mask, decal sheet and is backed with JConcepts customer support and racing heritage. Performance driven, battle tested – JConcepts is, World Proven Innovation and Design.
NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
Vendor: JConcepts
Type: Racing Body
Price:
30.99
The JConcepts TLR 8ight-X 2.0/E "S15" Body blends performance features on the popular Silencer body with features such as mid-body winglets and rear stabilizer kick-up. The roof of the body remains strong with the upper fin in position for stability and tracking ability. The engine area remains clean and a deep rooted position allows the engine head maximum side exposure to air and escape. The front and rear body mount area is cleanly designed and allows for a drop-fit on the TLR 8ight-X 2.0/E.
What started out as a simple task was anything but. For the precise fit, the design has undergone changes to match the Team Associated chassis side-guards and body mount positioning. The S15 stance cockpit allows ample fuel tank access, a smoother high-speed windshield transition which tackles even the most high-speed conditions. The hard edged chamfering provides the classic JConcepts look while also delivering aero benefits and perfect decal positioning. Each S15 body receives window mask, decal sheet and is backed with JConcepts customer support and racing heritage.
NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
Vendor: Losi
Type: Wing
Price:
15.99
Losi Wing: 8X, 8XE, 8XT
Vendor: JConcepts
Type: Racing Body
Price:
29.99
The JConcepts B6.4/B6.4D "P2" Buggy Body with Carpet Wing for the Team Associated B6 vehicle is the meanest, nastiest thing out for 1/10th buggy racing. The Punisher 2 separates itself from the rest with its distinctive styling. The P2 is all about performance with riveting details including raised nose/hood, taller cab and rear-end force features. The side-pods are once again JC chamfered to provide that legendary look and the secondary window screams JConcepts styling. The cab drops off quickly and runs deep toward the rear giving plenty of drift to the newly added winglets. The tall, rear fin stabilizer acts as a vane to keep the buggy tracking in the proper direction while also maintaining a rigid roof-line even with light-weight materials. The P2 body is also available in a standard weight version (JCO0476) giving you extra durability.
The Punisher 2 body is made famous by Spencer Rivkin taking the 2wd modified TQ and 1st place during the 2019 IFMAR World Championships in Trencín, Slovakia. Dakotah Phend uses the P2 body at dirt racing events winning the 2021 and 2022 ROAR National Championship with the unique body shell style. The P2, available in standard weight, and light-weight materials give users unmatched tunablity while delivering on class leading looks and swagger.
NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
Features:
Includes: