Vendor: Estes
Type: Rocket Parts
Price:
6.97
These spiral wound, Kraft paper body tubes are 14.2 in. in length and can be used as impressive single stage rocket, or it can be coupled with a second BT-80 Body Tube using our BT-80 Tube Couplers to create a super-sized rocket capable of handling any of our 24 mm or 29 mm engines. To accomplish this, simply combine the BT-80 Body Tubes with our Laser Cut Ring Set and it will be possible to create a TARC competition rocket that uses a single Estes 29 mm E16 or F15, a single Estes 24 mm C11, D12 and E12 engine or a 24 mm C11, D12 or E12 cluster rocket for added lift (additional Estes 24 and 29 mm motor mounting components required). To complete the massive size and power capabilities of the BT-80 Body Tubes, a TARC team can incorporate either NC-80K Blow Molded Nose Cone or NC-80B Blow Molded Nose Cone for an impressive and competitive egg lofting rocket.
ADDITIONAL INFORMATION
Inside Diameter
2.56 in (65.02 mm)
Outside Diameter
2.6 in (66.04 mm)
Wall
0.02 in.
Length
14.2 in. (36.1 cm)
Weight
1.85 oz
Vendor: Estes
Type: Rocket Parts
Price:
44.99
Track your rocket's altitude with the Estes Digital Model Rocket Altimeter! This innovative device uses advanced technology to provide accurate altitude readings, helping you optimize your rocket's performance. Say goodbye to guessing and hello to precision. Blast off to new heights today!
Vendor: Estes
Type: Rocket Parts
Price:
8.99
Vendor: Estes
Type: Rocket Parts
Price:
10.99
This is the recovery wadding from the Pro Series II from Estes. It is suitable for ages twelve and up.
Features:
Includes: One package of recovery wadding
Specs:
Size: 4 (101.6mm)
Vendor: Estes
Type: Rocket Parts
Price:
6.99
60 years ago, Vern Estes released the first commercially available model rocket motors. With it, came the Estes Starters that we all know and love. They’ve fueled the hobby for decades and are responsible for safer model rocket launches than any starter in history. When it came time to update this technology, we wanted to stay true to the simple design that made the Estes starters and motors a legendary combination, we just wanted to kick it up a notch! The new StarTech starters stay true to the design of the original, with one key addition. The small nichrome wire, the one that heats the propellant at launch, has been dipped in a specially crafted chemical compound that reacts with the heat of the wire to create a large burst of heat and pressure that ensures ignition. Never misfire again!
Age Recommendation |
Estes model rocketry is recommended for ages 10 and up with adult supervision for those under 12. Unless otherwise specified, all models require assembly. Tools, construction and finishing supplies sold separately. In order to launch, a launch system, model rocket engines, starters and recovery wadding are required – sold separately-unless otherwise specified. |
---|
Vendor: Estes
Type: Rocket Parts
Price:
33.99
The “E” launch pad sports a beefier blast deflector and stand to handle those “E” powered engines. The more durable design lends to a longer life expectancy and enables you to launch any of the Estes model rocket engines.
This pairs perfectly with the “E” launch controller.
Quick assembly. Includes a 1/4 in. (6 mm) launch rod, but can accommodate a 3/16 in. (5 mm) Maxi launch rod – not included.
Vendor: Sunward
Type: Rocket Parts
Price:
3.99
1 of BT50 Long Ogive Nose Cone
1 Plastic Nose Cone
Use plastic cement, in small quantities to glue pieces together. If needed, apply nose weight before gluing
**No Image at this Time**
Vendor: Sunward
Type: Rocket Parts
Price:
4.99
1 of BT20 Nose Cone
2 1/8" Long Ogive
Use plastic cement, in small quantities to glue pieces together. If needed, apply nose weight before gluing
**Image Not Available**
Vendor: Estes
Type: Rocket Parts
Price:
29.99
Vendor: Estes
Type: Rocket Parts
Price:
8.99
Vendor: Estes
Type: Rocket Parts
Price:
9.99
Use tube couplers to connect tubes of the same diameter.
Three tubes per package.
Will fit nose cones NC-60.
Inside Dimension |
1.595 in (40.5 mm) |
---|---|
Outside Dimension |
1.64 in (42 mm) |
Length |
18 in (45.7 cm) |
Vendor: Estes
Type: Rocket Parts
Price:
9.99
Use tube couplers to connect tubes of the same diameter.
Three tubes per package.
Will fit the NC-55 nose cones.
Inside Dimension |
1.283 in (32.6 mm) |
---|---|
Outside Dimension |
1.33 in (34 mm) |
Length |
18 in (45.7 cm) |
Vendor: Estes
Type: Rocket Parts
Price:
8.99
Four body tubes per package.
Use tube couplers to connect tubes of the same diameter.
Works with the NC-5 nose cone.
Inside Dimension
.518 in (13.2 mm)
Outside Dimension
.544 in. (13.8 MM)
Length
18 in (45.7 cm)
Vendor: Estes
Type: Rocket Parts
Price:
8.99
Precision Laser cut Centering Rings (30 total) and Paper Adapter Shrouds (4 total).
DCC | Equipped |
Lighted | LED |
Wheel Configuration | 2-6-0 |
Sound | Econami |
Vendor: Estes
Type: Rocket Parts
Price:
8.99
Vendor: Estes
Type: Rocket Parts
Price:
7.99
Vendor: Estes
Type: Rocket Parts
Price:
7.99
Each package of nose cones contains four nose cones that will fit the BT-55 body tubes. All have eyelets for shock cord and shroud line attachments.
Vendor: Estes
Type: Rocket Parts
Price:
35.99
Specifications:
Length: 12.3 in. (31.2 cm)
Diameter: .98 in. (25 mm)
Estimated Weight: 1.2 oz. (34 g)
Fins: Plastic
Recovery: 12 in. (30.5 cm) Parachute
Projected Max Altitude: 1100 ft. (335 m)
Needed to Complete:
Vendor: Estes
Type: Rocket Parts
Price:
9.99
NC-60 Nose cone will fit the BT-60 body tube.
Vendor: Estes
Type: Rocket Parts
Price:
7.99
Includes two couplers for the BT-55, Bt-56 and BT-60; one for BT-.80.
Vendor: Estes
Type: Rocket Parts
Price:
11.99
This accessory pack contains 3, 1/2 in. x 96 in. heavy duty elastic shock cords for shock your next big rocket design or as a replacement.
Length |
90.00 in. (228.60 cm) |
---|---|
Weight |
0.815 oz. |
Vendor: Estes
Type: Rocket Parts
Price:
11.99
This accessory pack contains all the component parts for mounting one or two 24 mm D and E engines in BT-55, 60 and 80 body tubes. Included are:
Hook Retainer HR-50 |
Inside Diameter (ID) : 0.99 in. (2.51 cm) |
---|---|
Body Tube BT-50 |
ID : 0.95 in. (2.41 cm) |
Adapter Ring 2050 |
ID : 0.75 in. (1.89 cm) |
Adapter Ring AR-5055 |
ID : 0.99 in. (2.50 cm) |
Spacer "E" to "D" Engine |
ID : 0.72 in. (1.83 cm) |
Large Laser Cut Centering Ring |
Length : 6.00 in. (15.24 cm) |
Small Laser Cut Centering Ring |
Length : 4.00 in. (10.16 cm) |
D Engine Hook |
Length : 3.10 in. (7.87 cm) |
E Engine Hook |
Length : 4.10 in. (10.41 cm) |
Vendor: Estes
Type: Rocket Parts
Price:
6.99
This accessory pack contains four spiral wound paper launch lugs in four different sizes: 1/8 in. x 1 1/4 in., 3/16 in. x 2 in., 1/8 in. x 2 3/8 in. and 1/4 in. x 1 in.
Vendor: Estes
Type: Rocket Parts
Price:
5.99
This 15 in. (38 cm) parachute is preassembled and ready to use on model rockets that require a 15 in. parachute.
The perfect size when an 18 in. parachute is too big and a 12 in. parachute is too small.
Vendor: Estes
Type: Rocket Parts
Price:
19.99
This is an Estes Pro-Series II 30" Nylon Parachute. This 30 in. (76 cm) nylon parachute was designed for Estes' biggest rockets, the Pro Series II. Made of high quality nylon to last!
Includes:
1x Preassembled 30 in. (76 cm) Nylon Parachute