edusportsonline

Spektrum Smart LiPo Bag (14x6.5x8 cm)

2024-09-17T17:55:49-04:00

	Proveedor: Spektrum Tipo: Lipo Bag Precio: 12.99
The Spektrum Smart LiPo Bag has exterior dimensions of 14 x 6.5 x 8 cm, making it the perfect size for storing and transporting your valuable LiPo batteries. This essential accessory, with item number SPMXCA400, is a must-have for any drone or RC enthusiast looking to safely and responsibly handle their batteries.

Progressive RC XT60 to JST Charge Cable

2024-09-05T13:31:06-04:00

Proveedor: Progressive RC
Tipo: Charge Adapter
Precio: 3.49

Our main charge leads are constructed from the highest quality materials to ensure that you get the best connection possible every time you charge your batteries.

Directly connect to your batteries with JST connectors, and to your charger with an XT60 plug. 12" of top-quality 18 AWG silicone wire gives you the flexibility to work in any charging setup.

Input Connector (Cable)	Male XT60 (male housing, female bullets)
Output Connector (Cable)	Female JST
Current Rating	20A
Gauge (Wire)	18 AWG Silicone
Length (Wire)	12"

Progressive RC XT60 to EC5 Charge Cable

2024-09-05T13:27:18-04:00

Proveedor: Progressive RC
Tipo: Charge Adapter
Precio: 7.99

Our main charge leads are constructed from the highest quality materials to ensure that you get the best connection possible every time you charge your batteries.

Directly connect to your batteries with EC5 connectors, and to just about any charger with XT60 connector.

Input Connector (Cable)	Male XT60 (male housing, female bullets)
Output Connector (Cable)	Female EC5 (female housing with male bullets)
Current Rating	40A
Gauge (Wire)	9 AWG Silicone
Length (Wire)	12"

Progressive RC XT60 to EC3 Charge Cable

2024-09-05T13:17:46-04:00

Proveedor: Progressive RC
Tipo: Charge Adapter
Precio: 5.99

Our main charge leads are constructed from the highest quality materials to ensure that you get the best connection possible every time you charge your batteries.

Directly connect to your batteries with EC3 connectors, and to most modern chargers with the XT60 connectors. 12" of flexible 14 AWG silicone wire gives you the flexibility to work in any charging setup.

Input Connector (Cable)	Male XT60 (male housing with female bullets)
Output Connector (Cable)	Female EC3 (female housing with male bullets)
Current Rating	40A
Gauge (Wire)	14 AWG Silicone
Length (Wire)	12"

Onisiki LiPo Battery Monitor Checker (1-8S)

2024-08-21T10:54:31-04:00

	Proveedor: Onisiki Tipo: Battery Checker Precio: 9.99
The Onisiki LiPo Battery Monitor Checker is a stylish option to verify the cell voltages of your battery. This checker will also work as a low voltage alarm should your ESC not be equipped with one. Package includes one LiPo checker.

HOTA/ Gens Ace Charger Extension Kit

2024-08-14T10:06:56-04:00

	Proveedor: SMC Tipo: Charge Adapter Precio: 7.95
This extension kit allows you to extend the wire length of the balance board and charging cable for the HOTA chargers or any other charger (Gens Ace, etc) that uses XT60 and JST-XH balance connectors.

ProTek RC Male XT60 to Female EC3 Adapter

2024-08-08T10:48:50-04:00

Proveedor: ProTek
Tipo: Charge Adapter
Precio: 4.49

This is a Male XT60 to Female EC3 plug adapter from ProTek R/C. This adapter will allow you to use batteries with an XT60 with a vehicle equipped with EC3 or IC3 plug; including vehicles from Losi, Arrma, Axial and more.

Additionally, this adapter will allow you to charge your XT60 batteries on any of the IC3 equipped Smart Chargers from Spektrum.

Reve D LiPo Safety Bag Version 2

2024-08-06T17:18:20-04:00

Proveedor: Reve D
Tipo: Lipo Bag
Precio: 24.99

Introducing the new and improved LiPo Bag 2 - the ultimate solution for increasing safety during battery charging and storage. This versatile bag is perfect for both short and standard size LiPo batteries, thanks to its flame-retardant materials and wide Velcro. In the unlikely event of a fire, the damage will be minimized. Plus, the large-capacity Radio Bag 2 is a convenient choice for carrying and storing your radio, chargers, and other accessories. Don't settle for anything less than the best - choose LiPo Bag 2 for your safety needs!

Progressive RC Compact No-Wire Battery Adapters (1pc)

2024-05-20T15:18:34-04:00

	Proveedor: Progressive RC Tipo: Charge Adapter Precio: 4.99
This compact converter is the next best thing to replacing the connector on your battery. Minimal resistance and a tiny footprint ensure that you'll barely notice having the adapter in place. Use the option selection to select the proper adapter for your application

Tuning Haus 2S Shorty Lipo Safety Storage Bag

2024-05-15T11:48:05-04:00

	Proveedor: Tuning Haus Tipo: Lipo Bag Precio: 10.99
Safely store, transport, and charge one or two 1S or 2S shorty LiPo packs using this convenient bag, featuring heavy-duty construction and solid hook and loop fasteners for added safety and security. Overall dimensions: 115 x 55 x 55 mm

Bat-Safe LiPo Battery Charging Box

2024-05-09T15:42:43-04:00

Proveedor: Bat-Safe
Tipo: Lipo Bag
Precio: 79.99

The Bat-Safe LiPo Charging Case is a simple and effective solution for charging and storing LiPo batteries. If you have an R/C model, chances are you own at least one lithium battery. Lithium batteries are an integral component to surface and air models. In rare instances, lithium batteries can become hazardous and catch fire - destroying your personal items, your home and maybe even the life of you or a loved one.

Thats why Bat-Safe was developed. Bat-Safe is an insulated and vented, steel, double wall steel box that contains the fire and intense heat in the event of a battery fire. The smoke and soot is filtered through a built in flame smothering filtration system to protect the area from odor and a majority of the smoke damage that can occur from a battery fire. Plus, Bat-Safe is light weight, easy to use and most importantly, inexpensive! The Bat-Safe is cheap insurance for anyone who uses lithium batteries of any size.

Other features include the ability to charge and store up to two 6S 5000mAh (222Wh) LiPo batteries safely, a charger stand to help keep your charging station organized and tidy, a handle for easy transportation, a fire proof lid seal, a wire through port that provides an access point for charging wires. All of these features combined make Bat-Safe the most advanced battery charging accessory that creates a safer charging environment than anything else currently available.

In order to utilize the Bat-Safe to it's full advantage, Bat-Safe recommends using balance cable extensions (sold separately) that can connect to the charger on the outside, while charging the battery inside the Bat-Safe box.

Specifications:
Charge Space: 9.5x6.5x4"
Outer Dimensions: 12x9x7"
Weight: 4 pounds
Maximum Battery Capacity: 2x 6S 5000mAh (222Wh)

Traxxas TRX-4M ID Battery Charger Port Adapter

2024-04-26T10:35:39-04:00

	Proveedor: Traxxas Tipo: Charge Adapter Precio: 10.00
Introducing the Traxxas TRX-4M ID Battery Charger Port Adapter. This innovative adapter features the TRX-4M iD charging port and a 2-amp charging capacity, making it easy and efficient to recharge your #2821 2-cell LiPo battery with any Traxxas EZ-Peak iD charger. Say goodbye to complicated charging processes and hello to convenience and speed!

Progressive RC Short Wired Battery Adapters - 3" (1)

2024-04-10T14:43:16-04:00

Proveedor: Progressive RC
Tipo: Charge Adapter
Precio: 3.99 - 4.99 (6 variants)

Progressive RC Short (3" total length) Wired Battery Adapters

This is a Progressive RC Short 3" wired battery adapter. Package will include one adapter, 3" in total length. Available in various connectors, use the menu to choose which option you need.

SMC Racing Precision Lipo Alarm

2024-04-04T14:28:42-04:00

Proveedor: SMC
Tipo: Battery Checker
Precio: 10.99

We are proud to introduce our Precision Lipo Alarm designed to get a more precise cutoff then an ESC. When running the Traxxas or Arrma ESC which are known to have the cutoff set to low and not adjustable this is a must have item if you are interested in getting maximum cycle life out of your packs.

With standard Lipo alarms the alarm is set at the desired cutoff but the alarm doesn’t account for voltage drop which occurs under heavy acceleration. This means the normal alarms will go off when the pack/cells haven’t reached the desired cutoff voltage. The SMC Precision Alarm has been designed to have a delay before the alarm goes off so this prevents voltage drop from heavy acceleration to trigger the alarm. The Precision Alarm will go off once the desired cutoff is reached. You can see the difference between a normal alarm and the precision alarm by clicking on the video link below.

https://www.edusportsonline.com/jZH8ZE8xYXE

As you can see in the video with the normal alarm set at 3.70V per cell the alarm goes off after a few heavy accelerations. The voltage of the cells is at 3.82V so there is still a good amount of play time left in the packs before the 3.70V cutoff is reached. We then switched to the precision alarm set at 3.70V per cell and we didn’t film the entire session but we got around 7 minutes of play time before the alarm finally went off. As you can see the cells were at 3.72V. This precision alarm is more precise then the ESCs cutoff as the voltage is measured at the cells by connecting the alarm through the balance connector. This by passes the voltage drop encountered in the power connectors and power wires.

We recommend you start with a 3.70V cutoff and see where the cells end up when the alarm goes off as the internal resistance of the cells will impact the amount of voltage drop. So packs with higher internal resistance cells may require the voltage to be lowered to 3.60V per cell.

The Precision Alarm is good for 2S to 8S packs. We sell it as a kit which has a 6S extension cable so you can mount it permanently in your vehicle where there is room. We also include 2 pieces of Velcro so you can mount the alarm either on the pack like the picture below or in the vehicle using the extension cable. We recommend to use the fuzzy side of the Velcro on the back of the alarm.

To set the cutoff on the alarm you must connect it using the proper polarity so the outside black wire on the balance connector must be connected towards the left when the alarm is facing you. You can see this in the picture below. To adjust the cutoff press the button on the end of the alarm until you reach the desired cutoff which we recommend to start at 3.70V. Please note the precision of the cell voltage readings on this alarm can be off by a few hundredths of a volt so it’s not recommended to use this alarm to check the precision of how well your charger charged the cells or if the cells are perfectly in balance once charged.

Below is a picture of the precision alarm installed in an E-Revo with the included extension. We recommend you always put the alarm on the pack that is connected to the negative side of the ESC. We also recommend you label your packs and switch sides every use.

Gens Ace 4S XH Male to Male Battery Balancing Cable

2024-03-26T19:42:55-04:00

Proveedor: Gens Ace
Tipo: Charge Adapter
Precio: 4.99

The Gens Ace 4S XH Male to Male Battery Balancing Cable is an essential accessory for maintaining proper battery balance.

This balance adapter is a replacement intended for Gens Ace 4S batteries with a built-in balance port on the battery. Package includes one balance adapter.

LiPo Battery Charging Safety Sack (Assorted Sizes)

2024-03-13T19:46:16-04:00

Proveedor: Racers Edge
Tipo: Lipo Bag
Precio: 8.99 - 17.99 (3 variants)

Safely and conveniently store, transport, and charge a wide range of LiPo packs with Racer's Edge new safety sack. Constructed from durable and flame resistant ballistic material with heavy-duty stitching and aggressive hook & loop closures.

Large: 330mm x 220mm

Easily holds up to five 6S packs.

Medium 230mm x 180mm

Easily holds up to three 6S packs.

Small 150mm x 110mm:

Easily holds smaller 1S-3S LiPo packs

Briefcase 240mm x 180 x 65mm

Easily holds up to five 6S packs.

Progressive RC TRX ID Charge Cable (Assorted Sizes)

2024-02-07T16:22:03-05:00

Proveedor: Progressive RC
Tipo: Charge Adapter
Precio: 11.99

Input Connector	Male XT60 (male housing, female bullets) & male JST-XH (male housing, female pins)
Output Connector	TRX ID
Current Rating	35A
Wire Gauge	16 AWG
Length	12"

Gens Ace XT60 Male to EC5 Female Adapter Cable

2023-11-09T20:11:15-05:00

	Proveedor: Gens Ace Tipo: Charge Adapter Precio: 4.99
This Gens Ace XT60 male to EC5 female adapter cable is a reliable, durable solution for your battery connection needs. It features a heat-resistant design that ensures safe, prolonged use. With a secure connection and impact resistance, you can depend on these cables for efficient power transfer.

Traxxas USB-C Power Cable (100W HO)

2023-09-07T13:06:41-04:00

	Proveedor: Traxxas Tipo: Charge Adapter Precio: 7.00
This USB-C Power Cable is a high output device capable of delivering up to 100W of power.

Spektrum RC Pro Series Race 4s Charge Cable: IC3/5mm

2023-08-28T19:58:23-04:00

	Proveedor: Spektrum Tipo: Charge Adapter Precio: 19.99
Pro Series Race 4s Charge Cable: IC3/5mm

SMC Traxxas Charge Cable (4mm Bullets)

2023-07-14T14:13:26-04:00

	Proveedor: SMC Tipo: Charge Adapter Precio: 3.99
This is a 4mm to Traxxas adapter that can be used on chargers that use a 4mm female connector to connect the power leads.

Gens Ace 4S XH Balance Cable (JST-XHR-5P to Molex-43645-5P)

2023-07-13T10:50:17-04:00

	Proveedor: Gens Ace Tipo: Charge Adapter Precio: 3.99
Gens Ace 4s XH Balance Cable. This is a replacement for the Gens Ace 7500mAh 4s LiHV Battery (GEA75004S13D5), as well as any other batteries that feature a Molex-43645-5P connection on the battery, and require a 4s XH balance connector. Package includes one balance cable.

Adaptador de cargador SMC de 4 mm a Deans *Descontinuado

2023-07-03T16:17:05-04:00

	Proveedor: SMC Tipo: Charge Adapter Precio: 3.99
Este es un adaptador de 4 mm a Deans que se puede usar en cargadores que usan un conector hembra de 4 mm para conectar los cables de alimentación.

Progressive RC JST-XH 6s (7 hilos) Extensiones de cable de equilibrio

2023-06-19T12:23:46-04:00

Proveedor: Progressive RC
Tipo: Charge Adapter
Precio: 4.99

Nuestros cables están construidos con materiales de la más alta calidad para garantizar que obtenga la mejor conexión posible en todo momento.

Estos cables de extensión le brindan un margen de maniobra adicional de 12 "para la conexión de su equilibrio, o 24" si encadena ambos cables, lo que le permite cargar en cualquier situación en la que se encuentre.
Especificaciones:

Conector de entrada: Hembra JST-XH, PolyQuest o Thunderpower
Conector de salida: Macho JST-XH, PolyQuest o ThunderPower
Tipo de alambre: Silicona 22 AWG
Longitud: 12"

Comprobador de batería Progressive RC CellMeter 8

2023-06-19T12:21:14-04:00

Proveedor: Progressive RC
Tipo: Battery Checker
Precio: 16.99

Mantenga un control y una medición precisos del voltaje de su batería con esta herramienta precisa. La interfaz simple y fácil de usar en la pantalla LCD retroiluminada grande y fácil de leer del CellMeter le permite ver los voltajes de las celdas individuales con una precisión de tres decimales. Este medidor puede funcionar con una batería 1S-8S, y también cuenta con funciones de prueba de equilibrio, descarga y servo, lo que lo convierte en una herramienta imprescindible para todos los aficionados.

Tenga en cuenta que para comprobar una batería con un voltaje inferior a 6 V, como una LiPo 1S, se debe proporcionar una fuente de alimentación adicional, como cualquier LiPo 2S-8S conectada al puerto de la balanza.

NOTA: El color del medidor puede variar de la imagen.