Proveedor: ProTek
Tipo: Glow Plug
Precio:
11.99
This is the ProTek R/C Gold O.S. P3 "Ultra Hot" Turbo Glow Plug, the exclusive plug of the Samurai 321B Nitro Engine. The ProTek R/C P3 plug is designed for use in most .18 - .28 off-road turbo head engines such as O.S., RB, Novarossi, Werks and Orion. This P3 variety provides ultra hot operation for optimal idling and acceleration. Package includes one plug.
Features:
Proveedor: Morgan Fuel
Tipo:
Precio:
28.75
Proveedor: Assault RC
Tipo: Nitro
Precio:
69.99
This is the Assault RC 120V Engine Head Heater. The Assault RC 120 Volt Engine Heater allows you to pre-heat your engine without the use of a heat gun before starting your engine on the starter box. This Heater is designed to uniformly heat all the critical internals of your engine, to help relieve the stress on the crank, connecting rod, piston and sleeve during warm-up. It will properly pre-heat your engine to 180-200°F in as little as 10 to 15 minutes (depending on ambient temperature).
This Engine Heater was designed with racing in mind, but is a powerful tool that can also be used by any nitro RC enthusiast. Pre-heating your race engine has become an important part of any competitive racing program to ensure your engine is ready to rip when the tires hit the track. This product makes the pre-heating process effortless, allowing you to focus on the important details like chassis setup and engine tune. No more warm up laps to build engine temps, no more waving a heat gun around trying to evenly distribute heat to your engine before you break it in or start it up on a cold day. Most importantly, this engine heater will quickly pay for itself by increasing engine life and performance! Get the maximum life and performance out of your high performance RC racing engine with the Assault RC Engine Heater.
Features:
Proveedor: Ultimate Racing
Tipo: Nitro
Precio:
28.69
This is the Ultimate Racing pre-oiled foam air filter, and it's been specially designed for use with Mugen MBX8R air filter. The combination of this pre-oiled foam air filter with the Ultimate Racing air filter oil guarantees the maximum air flow and offers an excellent air filtration and protection for your engine. Available in economic packs of 6 or 12 pieces pre-oiled and safely stored in a double zipper bag, so can be stored for long time and ready to use when you need them.
Proveedor: Ultimate Racing
Tipo: Nitro
Precio:
14.00
This is the Ultimate Racing pre-oiled foam air filter, and it's been specially designed for use with Mugen MBX8R air filter. The combination of this pre-oiled foam air filter with the Ultimate Racing air filter oil guarantees the maximum air flow and offers an excellent air filtration and protection for your engine. Available in economic packs of 6 or 12 pieces pre-oiled and safely stored in a double zipper bag, so can be stored for long time and ready to use when you need them.
Proveedor: Robart
Tipo: Aircraft Parts
Precio:
9.97
This Fueler is ideal for tightly cowled engines where access is difficult. It automatically connects your fuel source to the fuel tank for refueling, then it reconnects the tank to the engine crankcase, all without disturbing the fuel lines. Safe for use with glow, gas and smoke fluids.
Proveedor: ProTek
Tipo: Nitro
Precio:
169.99
This is the ProTek R/C 2090, EFRA 2089 Tuned Pipe, with an included 2090 75mm Manifold. This package also includes two long manifold springs, three short pipe springs and two manifold gasket.
The ProTek R/C 2090 is a finely-crafted competitive .21 off-road tuned pipe that features a mirror like chrome finish and high strength welded nipple. Designed with a narrower, longer body, the 2090 is ideal for increased bottom end performance and small track optimization. Although the 2090 is not as smooth as the ProTek R/C 2060 pipe, it will provide great torque for those hard to clear jumps, and heavy truggies.
2090 Tuned Pipe Features:
Includes:
Proveedor: Daves Discount Motors
Tipo: Parts
Precio:
23.99
Fullforce RC 2nd Generation High Flow Fuel Line Kit
Updated fully machined brass fittings and high quality Tygon fuel line allow for unrestricted fuel flow with this setup. Bring your engine back to life and get rid of those stock restrictive fuel lines! This kit not only allows better fuel flow and more power out of your engine but it also routes you fuel lines in a much cleaner and more professional manner.
Taking into consideration comments from our customers on our original kit we've addressed all the issues here. No more worries about the fit in the stock grommet, or having the sharp machined barbs cut your fingers during the install. These new fittings are perfectly sized to the supplied fuel line. The barbs are integrated into the fittings and they hold super tight in the rubber grommet.
Kit includes two assembled brass fittings, fuel line clips and two feet of Tygon fuel line. Can be used in the Baja 5B and 5T/5SC as well as a variety of other 5th scale vehicles, including Losi 5ive, etc. Does not fit Losi DBXL.
Proveedor: Daves Discount Motors
Tipo: Parts
Precio:
6.99
These simple and inexpensive quick disconnects will allow quick and painless removal of engines or fuel tanks. Not only can you now quickly disconnect the fuel lines from your motor, but no more broken carb fuel fittings trying to pull the tubing off.
Also, if you have one of the small mechanical fuel pumps on your gas can, you never need to take the fuel cap off your car again, just get another set for your gas can/pump, and plug it right into the tank, no more debris falling in your fuel tank.
If you remove your motor, and are not going to be putting another motor in right away, or are swapping out between multiple motors, just run a male and a female off of the tank (and of course on the motor) and plug them into each other so no fuel leaks. The only maintenance required is to wipe off the male side of the connector when dirty, and that's it.
NOTE: Certain fuel tubing can be difficult to push over the barb depending on internal diameter of the fuel line. DDM suggests lightly sanding the barb down on the fuel connector and using some window cleaner to allow the fuel tubing to slide over more easily.
INCLUDES:
Proveedor: WIRC
Tipo: Parts
Precio:
32.99
Proveedor: O.S. Engine
Tipo: Glow Plug
Precio:
13.99
Proveedor: Traxxas
Tipo: Nitro Engine
Precio:
169.99
Proveedor: ProTek
Tipo: Nitro
Precio:
45.99
Proveedor: Daves Discount Motors
Tipo: Parts
Precio:
27.99
HPI Racing replacement fuel line set is a gas type fuel line with a built in filter. This product includes one gas line with built in filter. One clear gas fuel line and one rubber grommet.
Installation
Proveedor: ProTek
Tipo: Tools & Accessories
Precio:
4.99
Protek RC "Fast Fill 2" Fuel Bottle Plugs with O-Rings. These are replacement fuel bottle plugs for the Protek "Fast Fill 2" fuel bottle (PTK-7606). Package includes two fuel bottle plugs with O-rings.
Proveedor: Sullivan
Tipo: Nitro
Precio:
5.99
The Sullivan Gas Tank Re-Plumb Kit is designed for roof tank installations. The kit contains all the parts needed to quickly and easily reconnect gas tanks, offering a safe and reliable alternative to manual roof tank installations. Features include the highest-grade brass fittings and all necessary accessories.
Proveedor: O.S. Engine
Tipo: Glow Plug
Precio:
11.99
This is an O.S. #7 Glow Plug. Recently developed to focus on easier running at low and medium speeds, this plug is a slightly hotter heat range than the O.S. #8 plug. This plug is ideal for helicopter engines with superior performance around hovering RPM range, which is critical for smooth and powerful 3D and F3C type flight. Also great all around plug for most 2-stroke standard plug airplane, helicopter and car engines.
Model | Heat Range | Description |
No.6 | Hot | Formerly known as the OS A3 plug. This hot plug will provide a more stable idle and crisp acceleration when compared to a cold plug. This plug is recommended for low nitro content fuels and .12 class engines. |
No.7 | Medium Hot | Slightly "hotter" than the #8 and ideal for the constant "on/off" throttle action in 1/10 and 1/8 scale racing. |
No.8 | Medium | A medium heat range plug for 1/8 scale racing and most .12-21 car, boat and truck engines. |
No.10 | Cold | Formerly known as the OS A5 plug. This is now rated as a cold plug and is recommended for high nitro content fuel. This cold plug will produce the most power, but will provide a less stable idle and a narrow tuning window |
Proveedor: Traxxas
Tipo: Nitro
Precio:
14.00
This is the high volume air filter body for the Traxxas Revo 3.3.
Features:
Includes: Foam filter and pre filter, support cap, filter base and wire mount
Requires: Air filter oil
Specs:
Total Height: 3.9 (100mm)
Filter Diameter: 1.6 (41mm)
Proveedor: Morgan Fuel
Tipo:
Precio:
32.99
Formulación de una ventaja competitiva
Los combustibles para modelos Cool Power® están diseñados para satisfacer las demandas extremas de los motores de modelos modernos y brindar una protección y un rendimiento excepcionales. Los logros innovadores han permitido que Cool Power® gane excelentes críticas tanto en la competencia como en el campo de vuelo local. Las fórmulas de Morgan están optimizadas para motores de modelos para asegurar:
Rendimiento superior
Vida prolongada del motor
Excelentes características de afinación
Funciona como dice el nombre, "Cool"
funcionamiento limpio
Morgan Fuel comprende las necesidades específicas de su motor y las satisface con una lubricación de alto rendimiento, un paquete de aditivos diseñado científicamente, el nitro y el metanol más puros. Los pilotos de prueba ganadores del campeonato Morgan y nuestros casi 30 años de experiencia en la mezcla de combustible de clase mundial significan que obtendrá el mejor combustible para cualquier vuelo.
Porcentaje de nitro | 15 por ciento |
Proveedor: Mugen Seiki
Tipo:
Precio:
15.25
Esta es una botella de combustible Mugen Seki de 500 cc.
Proveedor: Mugen Seiki
Tipo:
Precio:
28.49
Proveedor: ProTek
Tipo:
Precio:
15.75
Proveedor: ProTek
Tipo:
Precio:
29.99
Este es el juego de iniciación ProTek R/C Nitro. Este paquete incluye muchos de los accesorios críticos que se requieren para que su vehículo nitro funcione, incluida una botella de combustible ProTek Fast Fill de 500 cc, un encendedor incandescente recargable SureStart, una llave grande de 5 vías, una llave pequeña de 4 vías, así como un destornillador pequeño de cabeza plana y un destornillador pequeño de cabeza Phillips.
El depósito graduado de 500 cc de la botella de combustible Fast Fill contiene suficiente combustible para durar un evento principal prolongado, mientras que el material supersuave facilita llenar el tanque rápidamente. Con 4.5 in, el pico anodizado en azul es lo suficientemente largo para pasar por cualquier abertura y encontrar el tanque. Se incluye una tapa de goma para evitar derrames y mantener la suciedad fuera de la botella, y la tapa está atada al pico para que no piérdelo.
El encendedor SureStart es un encendedor incandescente recargable de alta calidad con una celda NiMH de 1800 mAh incluida y un cargador de pared. Este encendedor tiene un alcance de 2,25" y el cargador de pared incluido cargará la batería en aproximadamente 6 horas. Para obtener el mejor rendimiento durante un día de carrera, se recomienda dejar el encendedor en el cargador cuando no esté en uso.
¡Las herramientas incluidas en este kit son donde entra en juego el valor real! La llave grande de 5 vías cuenta con llaves de tuercas de 8, 9, 10 y 12 mm, así como una llave de 17 mm en el centro, mientras que la llave pequeña de 4 vías tiene llaves de tuercas de 4, 5, 5,5 y 7 mm. ¡Eso es el equivalente a 9 llaves, en dos herramientas! También hay un destornillador de cabeza plana Φ3 con un alcance de 3" que es perfecto para afinar motores, y un destornillador Phillips Φ3 que se puede usar para mantener los servos o cualquier otra cosa que requiera un destornillador Phillips pequeño.
Incluye:
Proveedor: Racers Edge
Tipo:
Precio:
7.99
Botella de combustible de lujo de 500 cc
La botella de combustible de lujo Racer's Edge cuenta con una capacidad de 500 cc y un pico de aluminio anodizado con tapa de seguridad para una máxima durabilidad en todas las condiciones de carrera. Fabricado para una máxima flexibilidad para un abastecimiento de combustible rápido y eficiente durante las paradas en boxes.
Proveedor: Dynamite
Tipo:
Precio:
8.14